Saturday Night Racer

Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl
Saturday Night Racer >> CLASSIFIEDS >> parts for sale
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1167545673

Message started by DaveFoster on 12/30/06 at 10:14pm

Title: parts for sale
Post by DaveFoster on 12/30/06 at 10:14pm

Used parts for sale
New shop is much smaller and no room to store my used racing parts, also need extra cash to get my pure stock set up by a pro this year

Ford 9 inch gears,
543 Detroit locker 28 spline $300
486 mini spool 28 spline $250
529 alum spool 28 spline, gear is like new but has stripped splines in the alum spool $150
these above three gears are in black plastic nine inch carrier boxes, extra $20 each if you want the box also with a gear
loose ring and pinion Ford 9 inch
355 $25
430 $40

G.M. 10 bolt for mid seventies cars
Loose ring and pinion
342 $25
308 $25
488 $40
390 $40

ten 15X7 stock cars steel wheels 5 on 4 ½ mostly 3 inch backspace $15 each
two Ford T-10 4 speeds, one with shifter, worked great when taken out $100 for both and shifter

Ford Cleveland loose parts
Three 4 barrel heads, quenched chambers, $50 each
Two cast iron four barrel intack manifolds $ 25 each
One alum single plane four barrel Wiend intack manifold $75
One set of cast iron four barrel exhaust manifolds for 71 Torino $50
Stud girdle set, slit alum bar, not the u-bolt type$75
Mini clutch, multi disc oval track type $ 50
One pair of Aussie quenched two barrel heads ready to go $700
One used Aussie short block 4 inch bore 3 inch stroke, in Cleveland style block $ 200

Windsor style Fluidampner for internal balance $25
65 mustang clutch, pressure plate, and flywheel $25

also have a new set of 15 X 7 inch white wall cheater slicks, Mickey Thompson style with crossed checkered flag threads ordered from Radar Wheels back east, still wrapped in plastic, cost just over four hundred dollars with shipping but I changed my mind and didn’t use them on my 409, I think it’s a three inch white wall $300

also have some assorted Pro heim end shocks $20 each, about six or seven

These prices are firm, unless you want all of it

Parts are in Riverside Cal, Dave Foster, shop phone 951-687-9323 or Cell 951-965-6947

Title: Re: parts for sale
Post by DaveFoster on 01/01/07 at 1:57pm

The 4 speeds are sold

Title: Re: parts for sale
Post by DaveFoster on 01/01/07 at 6:59pm

The slicks are sold.