Saturday Night Racer

Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl
Saturday Night Racer >> CLASSIFIEDS >> Steel Block 23 deg Engine FOR SALE
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1172463368

Message started by Craig C. on 02/25/07 at 8:16pm

Title: Steel Block 23 deg Engine FOR SALE
Post by Craig C. on 02/25/07 at 8:16pm

Steel Block 23 Degree 355ci Engine FOR SALE

The engine comes with the following:
1) Air Flow Research 220 Heads with Titanium Intake valves, Stainless Exhaust valves, Roller springs, Titanium Retainers, Spread Port, fully ported by Custom Race Engines (Heads Fresh Ready to Go)
2) Edelbrock Super Victor Intake Manifold, port matched to heads
3) Crower Shaft Mount Rocker Arms 1.7EX/1.8IN complete
4) Crower 230 series roller cam for tall rocker ratios
5) Moroso aluminum Valve Covers With Breathers.
6) Crower Lightweight 3.5 stroke crank with 350 main journals and 2.100 rod journals, weight: 47 lbs
7) New set of (8) Lunati 6” Pro Mod Rods with 2.100 journals, weight: 690 grams each
8) JE Pistons (.020 over); pistons were used with these heads
9) Isky Roller lifters
10) Moroso Water Pump
11) Brinn Transmission coupler
12) Timing Chain & Cover
13) Cast Iron Chevy 010 Block
14) Steel Canton Dry Sump Oil Pan

This engine package was last used in 2003 (won the Pacific Coast Xtreme DirtCar Series Championship). This engine produced 625HP (dry sump).

Prices:

Unassembled - $6,000
or
Assembled - $8,000

Top & Bottom Ends are also available separately:

*AFR 23 deg Top End:
1) Air Flow Research Heads with Titanium Intake valves, Stainless Exhaust valves, Roller springs, Titanium Retainers, fully ported by Custom Race Engines (Heads Fresh Ready to Go)
2) Edelbrock Super Victor Intake Manifold, port matched to heads
3) Crower Shaft Mount Rocker Arms 1.7EX/1.8IN complete
4) Crower 230 series roller cam for tall rocker ratios
5) Moroso aluminum Valve Covers With Breathers
6) Isky Roller Lifters

PRICE: $3,000

*Bottom End:
1) Cast Iron Chevy 010 Block
2) Crower Lightweight 3.5 Stroke Crank with 350 Main Journals and 2.100 Rod Journals; Weight: 47lbs
3) New set of (8) Lunati 6” Pro Mod Rods with 2.100 journals, weight: 690 grams each
4) JE Pistons (.020 over); pistons were used with these heads
5) Moroso Water Pump
6) Brinn Transmission coupler
7) Timing Chain & Cover
8) Steel Canton Dry Sump Oil Pan

PRICE: $3,000

*Links to Pictures of 23 Degree Engine Parts:
http://i44.photobucket.com/albums/f14/GotDirt001/23deg_parts9.jpg
http://i44.photobucket.com/albums/f14/GotDirt001/23deg_parts8.jpg
http://i44.photobucket.com/albums/f14/GotDirt001/23deg_parts7.jpg
http://i44.photobucket.com/albums/f14/GotDirt001/23deg_parts3.jpg

This is not junk. Serious inqueries only please. ALL reasonable offers will be considered.

Contacts:
John Duty - (503)-572-4466
or
Craig Cassell - (541)-981-1315 or c.cassell@earthlink.net

Title: Re: Steel Block 23 deg Engine FOR SALE
Post by Craig C. on 03/05/07 at 8:39pm

BTT.

Title: Re: Steel Block 23 deg Engine FOR SALE
Post by Craig C. on 03/16/07 at 12:44pm

BTT.