Saturday Night Racer

Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl
Saturday Night Racer >> CLASSIFIEDS >> Cleaning out the shop!!
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1217613186

Message started by jcsracing on 08/01/08 at 10:53am

Title: Cleaning out the shop!!
Post by jcsracing on 08/01/08 at 10:53am

Fuel cell 22 gl. tank beatup a little bladder ok $50.00
Fuel Cell 32 gl (jaz) $60.00
Ford nine in. with Gun drilled axles and hubs has thin roters on 62in wide. Has swing arm style mouted on it with cages. $600.00
Alm. seat with leg restriants (nice seat) $100.00
4 3/4 x 8 rims (cirle, bassetts, barts) many different offsets( no bead locks )
10 total $ 160.00 takes all 10
Chevelle lower control arms l and r $100.00 for both
Coleman steering wheel quickner, older style $20.00
2 driveline 28 1/2 in. and 29in. need yokes $ 40.00 for both
GM metric brake calipers have 4 of them $30 each
Alm rad 29 x 18 $80.00
Torker II intake $40.00
2000 Flexi flyer Mod cage with interior only Swing arm or a 3 link has adjustable upper a-frame mounts
$600.00

Everything above is for this car in you need a rolling chassis make an reasonable offer.

if you dont see what your looking for. IM me and I will see what I have.

18 years of racing I have a few things laying around that you might want.(even some pavement stuff)

559 708 3147
ask for Jon

Title: Re: Cleaning out the shop!!
Post by marvin_burleson on 08/04/08 at 3:35pm

do you still have the torquer two intake and if so does it fit a 350 chevy small block

Title: Re: Cleaning out the shop!!
Post by jcsracing on 08/04/08 at 4:20pm

Yes I do,
It is for a 350 chevy.

Title: Re: Cleaning out the shop!!
Post by bigmikes on 08/04/08 at 7:20pm

sent ya a pm

Title: Re: Cleaning out the shop!!
Post by marvin_burleson on 08/04/08 at 8:20pm

were are you located?

Title: Re: Cleaning out the shop!!
Post by jcsracing on 08/04/08 at 10:50pm

I m Clovis CA. I can ship it if you like. Or give me a call or instant message.

Title: Re: Cleaning out the shop!!
Post by jcsracing on 08/06/08 at 8:28am

updated 8/5/08

Fuel cell 22 gl. tank beatup a little bladder ok $50.00
Fuel Cell 32 gl (jaz) $60.00
Ford nine in. with Gun drilled axles and hubs has thin roters on 62in wide. Has swing arm style mouted on it with cages. $600.00
Alm. seat with leg restriants (nice seat) $100.00
4 3/4 x 8 rims (cirle, bassetts, barts) many different offsets( no bead locks )
10 total $ 160.00 takes all 10
Chevelle lower control arms l and r $100.00 for both Sold
Coleman steering wheel quickner, older style $20.00
2 driveline 28 1/2 in. and 29in. need yokes $ 40.00 for both Sold
GM metric brake calipers have 4 of them $30 each
Alm rad 29 x 18 $80.00
Torker II intake $40.00 Sold
2000 Flexi flyer Mod cage with interior only Swing arm or a 3 link has adjustable upper a-frame mounts
$600.00 Sale pending

Open car trailer with tire rack and front box, perfect for a mod,streetstock.mini stock.
$1500.00