|
Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl Saturday Night Racer >> CLASSIFIEDS >> IMCA mod motor http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1225844018 Message started by jselvidge on 11/04/08 at 4:13pm |
|
Title: IMCA mod motor Post by jselvidge on 11/04/08 at 4:13pm I have a fresh 360" (.040 over) mod motor sitting @ Precision Speed and Machine in Bakersfield. It has billet splayed mains, a cola 3.5" crank, crower rods, Pistons are Probes, Heads are full ported Vortec with a matched Edelbrock intake. Brand new comp cam. Rockers are crowers, valves are Manley severe duties. Complete pan to intake including a stewart water pump with pulleys, mini starter, small flywheel and a brinn coupler. No junk here, all good stuff. Call Jason Selvidge with any questions, can be seen @ the shop anytime. 661 303 3076. |
|
Title: Re: IMCA mod motor Post by jselvidge on 11/10/08 at 7:27am Forget to say asking price is $5,000. Also, I will consider part trades on a good aluminum block for our back up late model motor(400 blocks only) |
|
Title: Re: IMCA mod motor Post by jselvidge on 11/22/08 at 7:37am ttt |
|
Title: Re: IMCA mod motor Post by robbySAWYER on 11/22/08 at 8:11am i thought we made a deal...i see how it is lol |
|
Title: Re: IMCA mod motor Post by jselvidge on 12/01/08 at 8:21am ttt |
|
Title: Re: IMCA mod motor Post by jselvidge on 12/16/08 at 4:00pm I also have an isky roller cam, lifters, and pushrods that drop right into this motor that I will throw in if it sells by mid Jan. They are in excellent shape with only a handul of races from a few years back when this was my open show motor. |
|
Title: Re: IMCA mod motor Post by jselvidge on 01/01/09 at 12:59pm New year is here. Time to get ready to race. |
|
Title: Re: IMCA mod motor Post by jselvidge on 01/21/09 at 4:53pm ttt |
|
Title: Re: IMCA mod motor Post by robbySAWYER on 01/21/09 at 7:52pm hey check ur pm |
|
Title: Re: IMCA mod motor Post by jselvidge on 02/24/09 at 7:04am Still have it, will take $4500 and will consider separating short block from heads/intake. |
|
Title: Re: IMCA mod motor Post by jselvidge on 03/14/09 at 7:50am bump |
|
Saturday Night Racer » Powered by YaBB 2.2.3! YaBB © 2000-2008. All Rights Reserved. |