Saturday Night Racer

Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl
Saturday Night Racer >> CLASSIFIEDS >> Re: SS Chassis
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1229188655

Message started by Ryan D. on 12/13/08 at 10:14am

Title: Re: SS Chassis
Post by Ryan D. on 12/13/08 at 10:14am

This your old car. Or the one Eric Fossil built?

Title: Re: SS Chassis
Post by roaddog on 12/13/08 at 11:12am

this car come with stock floors & fire wall? and can i put the stock four link trailing arms in it

Title: Re: SS Chassis
Post by Joe83 on 12/13/08 at 5:31pm

IS IT OFFSET

Title: Re: SS Chassis
Post by Sparky56 on 12/13/08 at 7:37pm

Ryan D. wrote on 12/13/08 at 10:14am:

This your old car. Or the one Eric Fossil built?

This is my old car. Eric's is the one I'm working on for next year.......

Title: Re: SS Chassis
Post by Sparky56 on 12/13/08 at 7:41pm

roaddog wrote on 12/13/08 at 11:12am:

this car come with stock floors & fire wall? and can i put the stock four link trailing arms in it

It has most of the stock floor and a stock location fab firewall. It still has stock 4 link pick-up points. Can also run a 20" L/R spring.

Title: Re: SS Chassis
Post by Sparky56 on 12/13/08 at 7:42pm

Joe83 wrote on 12/13/08 at 5:31pm:

IS IT OFFSET

No......

Title: Re: SS Chassis
Post by whoya on 12/14/08 at 7:26am

Sparky,

Don't forget to tell them it's a E/W main event winner!

Title: Re: SS Chassis
Post by Sparky56 on 12/15/08 at 7:09am

Sparky56 wrote on 12/13/08 at 9:17am:

Coil spring chassis with floater rearend. No front suspension. 28 & 31 spline axles & drive plates. Wilwood pedels, howe masters.
:o $500.00 :o

It's rusting as we speak...................475.00 :D :D

Title: Re: SS Chassis
Post by mudslinger47 on 12/16/08 at 8:45am

Sparky56 wrote on 12/15/08 at 7:09am:

Sparky56 wrote on 12/13/08 at 9:17am:

Coil spring chassis with floater rearend. No front suspension. 28 & 31 spline axles & drive plates. Wilwood pedels, howe masters.
:o $500.00 :o

It's rusting as we speak...................475.00 :D :D

So are you!!!! I just couldn't resist!!! Duane

Title: Re: SS Chassis
Post by Ryan D. on 12/16/08 at 6:12pm

Joey post some pics of the car when you ran it.I cant believe for 500.00 no one has bit. Seeings how its full framed car it should legal for IMCA stocks right?

Title: Re: SS Chassis
Post by whoya on 12/16/08 at 8:05pm

east west main event winner with an old dude driving .......

Title: Re: SS Chassis
Post by mudslinger47 on 12/16/08 at 10:26pm

Ryan D. wrote on 12/13/08 at 10:14am:

This your old car. Or the one Eric Fossil built?

Speakin' of fossils-------------------------------------lol

Title: Re: SS Chassis
Post by bouncermike03 on 12/16/08 at 10:53pm

duane your not that old! LOL dont be so hard on yourself

Title: Re: SS Chassis
Post by mudslinger47 on 12/16/08 at 11:08pm

Yes I am, and so is he, thats how I get away with it!! LOL Duane

Title: Re: SS Chassis
Post by Sparky56 on 12/17/08 at 4:02pm

Good start for an IMCA stock car ;)

Title: Re: SS Chassis
Post by whiteyjr on 12/18/08 at 10:57am

Hey Joey when were these pictures taken? 1996?

Al ;D

Title: Re: SS Chassis
Post by Sparky56 on 12/18/08 at 4:05pm

whiteyjr wrote on 12/18/08 at 10:57am:

Hey Joey when were these pictures taken? 1996?

Al ;D

NO! 2006 & 2007 8-)

Title: Re: SS Chassis
Post by the_MISSLE on 12/18/08 at 9:14pm

Sparky, looks like you had an Escape Hatch in your roof?

Title: Re: SS Chassis
Post by ka_jd7and1 on 12/18/08 at 9:21pm

Is there any way it could be converted to a hobby stock? How much of the floorpan has been replaced? Would a stock firewall be able to be put back on?

Title: Re: SS Chassis
Post by Sparky56 on 12/18/08 at 9:37pm

ka_jd7and1 wrote on 12/18/08 at 9:21pm:

Is there any way it could be converted to a hobby stock? How much of the floorpan has been replaced? Would a stock firewall be able to be put back on?

With some work and a donor firewall/floorpan tub,it could be done. It has a stock floor and tunnel on the pass side 8-)
Front clip has screw jacks, center through shocks, and tube A arms.
Might be a little problem :o :o

Title: Re: SS Chassis
Post by hogracer3d on 12/18/08 at 9:41pm

It should go to the coiley hall of fame-:)

Title: Re: SS Chassis
Post by Sparky56 on 12/22/08 at 7:42am

Title: Re: SS Chassis
Post by Sparky56 on 12/27/08 at 10:01am

Same price, now with pictures.......... 8-) 8-)

Title: Re: SS Chassis
Post by OLD SCHOOL#6 on 12/27/08 at 10:52am

I didn't see where the Oxygen tank and the Defibrillator mount.................lol ;) :D ;D

Title: Re: SS Chassis
Post by Sparky56 on 12/27/08 at 11:11am

You came and got them, remember!! They are at the chrome shop so they can go in the '55 ;D :D ;D

Title: Re: SS Chassis
Post by Buddah on 12/28/08 at 10:32am

Hey check ur messages please.

Title: Re: SS Chassis
Post by Buddah on 12/28/08 at 10:43am

Does it come with rear brakes and axles?

Title: Re: SS Chassis
Post by OLD SCHOOL#6 on 12/28/08 at 11:06am

Sparky56 wrote on 12/27/08 at 11:11am:

You came and got them, remember!! They are at the chrome shop so they can go in the '55 ;D :D ;D

If it was more than two days ago, I probably don't remember..............lol :D

Title: Re: SS Chassis
Post by Sparky56 on 12/28/08 at 1:30pm

Buddah wrote on 12/28/08 at 10:43am:

Does it come with rear brakes and axles?

28 & 31 spline axles
28 & 31 spline drive plates
disc brakes w/ metric calipers

Title: Re: SS Chassis
Post by Sparky56 on 01/03/09 at 7:09pm

NEW YEAR FINAL PRICE $400.00 :D :D :D
ALSO:
9" 6.66 R/P $100.00
9" 28 spline full spool $50.00
Torker 2 intake $25.00

Title: Re: SS Chassis
Post by Sparky56 on 01/10/09 at 7:01pm

For those who asked, the floater is out of the #70/16 car Eric Fausel built in '98. It measures 61 5/8" flange to flange(I guess it's a 62" rearend). It hasn't seen action in about 6 yrs. Disc brakes, metric calipers. 28 & 31 spline axles & drive plates ;) ;)

Title: Re: SS Chassis
Post by Sparky56 on 01/29/09 at 10:28pm

DO I HEAR 350.00, ANYONE???? :-? :-?

Title: Re: SS Chassis
Post by woodracin13 on 01/30/09 at 8:58am

I need a Torker 2 intake but I am not driving all the way to Santa Maria to get it....lol.... It will cost me to much in gas.

Later

Title: Re: SS Chassis
Post by SS72 on 01/30/09 at 7:07pm

Sparky check your PM's.