Saturday Night Racer

Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl
Saturday Night Racer >> CLASSIFIEDS >> Hobby Stock , Factory Stock Engine 350 Sbc New
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1232734452

Message started by OcModified on 01/23/09 at 10:14am

Title: Hobby Stock , Factory Stock Engine 350 Sbc New
Post by OcModified on 01/23/09 at 10:14am

I have a nice 350 sbc engine for a H/S or F/S is has all of the following parts, it is a late 1 piece rear main 4 bolt block fresh .030 bore, decked, new cam bearings, cast crank with oil holes chamfered and deburred, stock rods resized with arp bolts, sealed power cast flat top 4 notch pistons with coated skirts, ballanced rotating assembly, clevite main and rod bearings, sealed power rings, new head bolts, heads are done up surfaced with new stainless valves and lt-1 springs, new GM ballancer and sfi heavy duty flexplate, all new parts ready for assembly i have more than the asking price just in the new parts. $1000obo
Thanks B

Title: Re: Hobby Stock , Factory Stock Engine 350 Sbc New
Post by OcModified on 01/25/09 at 7:25pm

Ok i want it gone $900 you cant buy the parts for that price.
Thanks B

Title: Re: Hobby Stock , Factory Stock Engine 350 Sbc New
Post by sundown on 01/28/09 at 10:33am

I need to know the part number on the heads to see if they are legal here. Is the block machined for a mechanical fuel pump and rod?

Title: Re: Hobby Stock , Factory Stock Engine 350 Sbc New
Post by OcModified on 01/28/09 at 10:45am

Head number is 10110810 non vortec, block is machined for mechanical fuel pump.
Thanks B

Title: Re: Hobby Stock , Factory Stock Engine 350 Sbc New
Post by OcModified on 02/02/09 at 1:38pm

$800 till the weekend if its not sold by then i am going to build it anybody ?
Thanks B

Title: Re: Hobby Stock , Factory Stock Engine 350 Sbc New
Post by woodracin13 on 02/02/09 at 8:42pm

Where are you located?? You said the heads aren't vortec? Do they bolt in the center or the 4 on the sides? Last question... Does the older style intake fit or is it the newer one that has the bolts straight? Hope that made since.

Let me know.
Thanks,
Jacky

Title: Re: Hobby Stock , Factory Stock Engine 350 Sbc New
Post by OcModified on 02/02/09 at 9:10pm

I am in Orange County but will be in Mohave Valley saturday, they are gen 1 center bolt covers non vortec heads and they take an intake with the 4 center intake bolts straight hope i explained it right ;D
Thanks B

Title: Re: Hobby Stock , Factory Stock Engine 350 Sbc New
Post by woodracin13 on 02/02/09 at 9:20pm

Yes you did. Thanks I will see what I can do. We are looking for an engine for my brother. Thanks I will let you know.

Title: Re: Hobby Stock , Factory Stock Engine 350 Sbc New
Post by OcModified on 02/11/09 at 12:08pm

SOLD SOLD SOLD ;D
Thanks B

Title: Re: Hobby Stock , Factory Stock Engine 350 Sbc New
Post by woodracing35 on 02/11/09 at 3:14pm

jackie you better not have bought that for mike...lol

Title: Re: Hobby Stock , Factory Stock Engine 350 Sbc New
Post by woodracin13 on 02/11/09 at 6:31pm

Why Johnny You scared??? lol I did

Title: Re: Hobby Stock , Factory Stock Engine 350 Sbc New
Post by K.WOOD on 02/12/09 at 7:37am

OF COURSE HE'S SCARED WATCH OUT JOHNNY BIG MIKE IS GOIN TO THE FRONT LOL

Title: Re: Hobby Stock , Factory Stock Engine 350 Sbc New
Post by woodracin13 on 02/12/09 at 9:14am

Thats right Buddy, He is going to the front. Don't you see who his teacher is.....LOL.... Yea right. We are building a good car I hope and I hope he can do good in it.

Title: Re: Hobby Stock , Factory Stock Engine 350 Sbc New
Post by K.WOOD on 02/12/09 at 10:15am

HE SHOULD DO GOOD JACKY "GO TO THE FRONT" WOOD IS T HIS SIDE LOL

Title: Re: Hobby Stock , Factory Stock Engine 350 Sbc New
Post by woodracing35 on 02/12/09 at 3:36pm

i aint scared just wanted to no who else is going to see my backside when i take the checkered flag in first...lol...i know kyle will be back there...lol...naw just kidding thats great cant wait to go racing again especially with big mike cause i know were all going to have a good time racing against each other...the only problem is that kyles going to have a hard time keeping up with me and big mike....lmao...and cant wait to c u in that hobby

Title: Re: Hobby Stock , Factory Stock Engine 350 Sbc New
Post by woodracin13 on 02/12/09 at 5:55pm

Don't forget you might have to pass me. Remember I might be out in that american I got...lol....