Saturday Night Racer

Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl
Saturday Night Racer >> CLASSIFIEDS >> ss 98 engine
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1232824460

Message started by robbySAWYER on 01/24/09 at 11:14am

Title: ss 98 engine
Post by robbySAWYER on 01/24/09 at 11:14am

motor built by standridge engineering... 480hp on dyno with 2bbl with air cleaner and full exhast system... 20k invested... inside of the block has been completely polished, every inch! 49cc dart heads untouched.... 32lb crank or 34 cant remember... external belt driven oil pump (imca and SS legal) block has needle bearings instead of bushing for cam... so cam is solid but it has needle bearing guides (not sure if i am saying that correctly) asking 8k

Title: Re: ss 98 engine
Post by TIM_BEWLEY on 01/24/09 at 2:42pm

wrote on 01/24/09 at 11:14am:

block has needle bearings for the camshaft

how about like this?

Title: Re: ss 98 engine
Post by jay99j on 01/24/09 at 6:28pm

looking for an engine sponsor

Title: Re: ss 98 engine
Post by robbySAWYER on 01/25/09 at 12:38am

ill sponsor it to you for 8k

Title: Re: ss 98 engine
Post by hogracer3d on 01/25/09 at 8:57pm

How many total races?

How many since last freshen up?

OEM block or aftermarket?

Have you ever had it on a 4-bbl?

Title: Re: ss 98 engine
Post by robbySAWYER on 01/25/09 at 9:57pm

15 races on it, only parts with more are crank and rods have 16 races....oem block, yes on 4bbl when i came to pas, and came from back to front twice to take the lead and get a flat... it is a gorgeou piece, all t&D shaft rockers, the cam is from hendrick motorsports, a cast cam will not work... every piston weighs EXACTLY the same they were each hand matched... never been above 205 degrees, ran 185 in the middle of summer and bakersfield

Title: Re: ss 98 engine
Post by robbySAWYER on 01/25/09 at 9:59pm

crank has probably 35 rods have 16

Title: Re: ss 98 engine
Post by hogracer3d on 01/26/09 at 7:55am

Bore, Stroke and rod length?

Title: Re: ss 98 engine
Post by robbySAWYER on 01/26/09 at 10:14am

bore 40 over
stroke 348
6 inch rods

Title: Re: ss 98 engine
Post by robbySAWYER on 01/28/09 at 10:29pm

proven winner