Saturday Night Racer

Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl
Saturday Night Racer >> CLASSIFIEDS >> World Sportsman x2 pair and Dart Iron Eagle 49cc
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1232836857

Message started by ells949 on 01/24/09 at 2:40pm

Title: World Sportsman x2 pair and Dart Iron Eagle 49cc
Post by ells949 on 01/24/09 at 2:40pm

Listing for a friend. Three sets of heads Both sportsman sets of heads are ported and the Iron Eagles are not though they have a seat repaired. Low laps off modified motors. I am assuming the Sportsmans are 60 cc. Decent offers please. I have myself used JE pistons for 355 and 383, unmachined 010/020 4 bolt block, 010/020 splayed cap block. Both blocks still at 4 inch stock bore. Pistons are .010 .020 .030 .040 and some Carrillo rod sets 5.85 and 6 inch. phone#5308959691

Title: Re: World Sportsman x2 pair and Dart Iron Eagle 49cc
Post by that61ss on 01/29/09 at 5:35pm

are both sets of the world heads repaired and been ran after they weere fixed?? what springs are they? what can they hold up to what size valve and runners.. can u get specs on all of the heades im interested in all 3 sets but would like to no more about them... where are you located as well?? thank you ricky 5597603830

Title: Re: World Sportsman x2 pair and Dart Iron Eagle 49cc
Post by ells949 on 02/02/09 at 10:45am

Only one Dart 49 cc head was damaged and fixed. Solid or roller springs available. 2.05 intake on mild ported Sportsman and 2.08 on larger sportsman. 2.05 on Dart 49 cc heads. Located in Santa Rosa Ca.

Title: Re: World Sportsman x2 pair and Dart Iron Eagle 49cc
Post by ells949 on 02/06/09 at 1:07pm

bump

Title: Re: World Sportsman x2 pair and Dart Iron Eagle 49cc
Post by ells949 on 02/13/09 at 9:37am

ouch!

Title: Re: World Sportsman x2 pair and Dart Iron Eagle 49cc MORE ADDED
Post by ells949 on 02/23/09 at 10:32am

I also have a chevy 010 350 4 bolt block with original 4.00 bore and a 2 bolt 010/020 standard 4.00 bore 350 block with splayed caps front and rear main strapped. cleatanced for 3.75 stroke and a beefy aluminum rod. Might clear 4 inch stroke with a steel rod! stock deck height still. Also a Gaerte prepared 400 block at 4.155 splayed caps with front and rear strap added.