Saturday Night Racer

Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl
Saturday Night Racer >> CLASSIFIEDS >> ENGINES, KSE, BERT,BRINN,OLDER SHAW LATEMODEL ROLLER
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1236330846

Message started by THROCKS11 on 03/06/09 at 1:14am

Title: ENGINES, KSE, BERT,BRINN,OLDER SHAW LATEMODEL ROLLER
Post by THROCKS11 on 03/06/09 at 1:14am

FRESH JUST OFF THE DYNO WITH SHEETS. 358 SBC,FRONT OILED 4 BOLT MAIN BLOCK,STEEL CRANK,BILLET I BEAM RODS,JE PISTONS,DART PORTED PLATINUM STEEL HEADS,ISKY SOLID LIFTER CAM, EDLEBROCK INTAKE,ROLLER ROCKERS,DUAL KICK OUT OIL PAN. DYNO'D AT 515 HP ON GAS. NEED TO SELL ASAP. STILL ON THE DYNO. PUT IT IN YOUR CAR AND RACE $5,500.

FRESH 406 SBC, 511 STUDDED 4 BOLT MAIN BLOCK, CALLIES STEALTH 3.750 CRANK,OLIVER 6" I BEAM RODS,CUSTOM JE DOME PISTONS,GEAR DRIVE, DUAL KICK OUT OIL PAN,ALUMINUM WATER PUMP,FULLY PORTED 23* ALUMINUM EDLEBROCK HEADS,STAINLESS VALVES,CROWER ROLLER CAM, CROWER ROLLER SEVERE DUTY LIFTERS, CROWER STAINLESS ROLLER ROCKERS, STUD GIRDLE, REV KIT, MATCH PORTED VICTOR INTAKE, ALCOHOL CARB 850, MSD DISTRIBUTOR, RONS BELT DRIVE FUEL PUMP. 600+ HP, STRONG ENGINE. $6,000 WITH EVERYTHING LISTED. MAY SELL SHORT BLOCK ONLY OR HEADS AND INTAKE.

GM 604 CRATE ENGINE WITH VERY LOW LAP TIME NEEDS REPAIRED. BROKE A RETAINER AND DROPPED #1 VALVE. CYLINDER IS GOOD, NEEDS HEAD REPAIR AND PISTON. ALSO HAVE A SET OF 604 CRATE HEADS WITH ALMOST ZERO TIME. NEW 604 SPRINGS, RETAINERS, SHIMS, KEEPERS. MAKE REASONABLE OFFER.

NICE BRINN ALUMINUM TRANSMISSION WITH COUPLER AND CHEVY ALUMINUM BELL HOUSING. 4 RACES ON TRANS. $1,100 FOR ALL.

90'S LARRY SHAW 2" X 3 " COMPLETE ROLLING CHASSIS WITH UP DATED 2" X 2" FRONT CLIP, NEW FRONT SUSPENSION, WILWOOD HUBS, COIL OVER FRONT AND REAR WITH NEW HYPER COILS SPRINGS, PRO SHOCKS AND HYPER COIL CARBON FIBER MONO LEAF SPRINGS, QUICK CHANGE REAR END, WILWOOD BRAKES,32 GALLON FUEL CELL,ALUMINUM RADIATOR AFCO,HEADERS,D&M SEAT, GAUGES, SHIFTER, RECALL TACH, BATTERY, DRIVE LINE, 5TH COIL, NEW BODY SIDES. BOLT ENGINE AND TRANS IN AND GO. $3,000, CAN BE TURNKEY ALSO. WILL DEAL NEEDS TO GO.

KSE TANDEM FUEL AND POWER STEERING PUMP REAR MOUNT STYLE WITH KSE 44 TOOTH HTD GEAR, KSE BOLT ON BELT GUARDS, KSE MOUNTING BRACKET KIT, CUSTOM BRASWELL PUMP MOUNTED SCREW IN REGULATOR BYPASS WITH FUEL PRESSURE LINE FITTING SO EVERYTHING IS BEHIND THE MOTOR PLATE, BERT MAGNESIUM SBC REAR DRIVE BELL HOUSING. EVERYTHING PERFECT AND ONLY HAS 2 RACES ON THEM $1,200.

BEYEA 604 OR CAN USE ON MANY OTHER APPLICATIONS, OVER THE FRAME HEADERS, FIT VARIOUS CHASSIS. GRT, SWARTZ, RAYBURN ETC, COME WITH EXTENSION'S AND MUFFLER INSERTS $500.

(4) MRT CARBON 14" X 15" X 5" OFFSET BEADLOCK WIDE FIVE WHEELS $500.

(2) ALUMINUM 12" X 15" X 4" OFFSET WIDE FIVE WHEELS $250.

520 358 2022
520 305 5153

Title: Re: ENGINES, KSE, BERT,BRINN,OLDER SHAW LATEMODEL ROLLER
Post by powerslide on 03/09/09 at 11:52pm

wana sell the bracket off that kse pump??? ;D

Title: Re: ENGINES, KSE, BERT,BRINN,OLDER SHAW LATEMODEL ROLLER
Post by THROCKS11 on 03/16/09 at 12:31pm

No thanks. Like to keep it all together. Everything still for sale.

Title: Re: ENGINES, KSE, BERT,BRINN,OLDER SHAW LATEMODEL ROLLER
Post by THROCKS11 on 03/23/09 at 10:56pm

Beyea headers SOLD.

Title: Re: ENGINES, KSE, BERT,BRINN,OLDER SHAW LATEMODEL ROLLER
Post by THROCKS11 on 04/05/09 at 9:42am

Carbon Wheels sold. Shaw car has many good parts on it. May part out or make me an offer. 520 305 5153, 520 358 2022.

Title: Re: ENGINES, KSE, BERT,BRINN,OLDER SHAW LATEMODEL ROLLER
Post by THROCKS11 on 04/16/09 at 5:31pm

Make reasonable offers or trades. NEED THIS STUFF GONE !!!!!!!
520 358 2022, 520 305 5153