Saturday Night Racer

Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl
Saturday Night Racer >> RACE TECH >> vinyl
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1270149330

Message started by mudslinger47 on 04/01/10 at 12:15pm

Title: vinyl
Post by mudslinger47 on 04/01/10 at 12:15pm

When taking old vinyl off what works best to remove the residue (sticky stuff) left on the panel? chet

Title: Re: vinyl
Post by Frazier15 on 04/01/10 at 12:37pm

I've used "goof off" from a hardware store. The stuff smells just like the butane you refill the old school lighters with--(maybe that would be cheaper?)

Simple green for the rest..

Thats what i do..

Title: Re: vinyl
Post by ka_jd7and1 on 04/01/10 at 12:56pm

Goo-Gone.

Might have to visit a hardware store, grocery store, or big box store to get it, but I have spotted it at the Dollar Store in the past.

Title: Re: vinyl
Post by SawyerRacing98 on 04/01/10 at 9:13pm

brake clean

Title: Re: vinyl
Post by Nick on 04/01/10 at 9:55pm

use a blow dryer or heat gun and it shouldnt leave residue

Title: Re: vinyl
Post by ministocker56 on 04/01/10 at 10:28pm

actuly you no what work's go to is finger nail palish remover

Title: Re: vinyl
Post by jp80 on 04/02/10 at 8:56am

acetone, which is finger nail polish works the best especially for older vinyl that has on for a while. Cheaper than brake clean, just get a gallon at the hardware store... Flammable so be careful