Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl Saturday Night Racer >> RACE TECH >> super stock gearing http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1272385346 Message started by Sherfy42 on 04/27/10 at 9:22am |
Title: super stock gearing Post by Sherfy42 on 04/27/10 at 9:22am What gearing should I be using at chowchilla with the dirt bosses and what gearing should I be at in handford with the g60 |
Title: Re: super stock gearing Post by MikeShepherd on 04/27/10 at 10:14am About a 7.0 is a good gear in chow, Hanford with g60 I have no idea might be a good question for the guys that ran there last week, but my guess would be 5.67? |
Title: Re: super stock gearing Post by Sherfy42 on 04/27/10 at 10:18am Thanks Mike. what rpm are you hitting with the 7.00 gear I was told i should be at 7100 to 7200 range |
Title: Re: super stock gearing Post by MikeShepherd on 04/27/10 at 10:31am Depending on your motor 7000 to 7400 |
Title: Re: super stock gearing Post by Missle Motorsports on 04/27/10 at 12:46pm SS#3d at Kings Speedway= " we had a 583 gear in and it still turned 8100 " I know he was on the G60 Rear Tire, but don't know which Carb they used. |
Title: Re: super stock gearing Post by hogracer3d on 04/27/10 at 2:48pm 4-bbl on the 434, g-60, 5.83, at Hanford, but with the 360 we'd probably go with 6.00 with Brinn, 6.20 with oem tranny. we were blowin the tires and leaning on the chip last weekend |
Title: Re: super stock gearing Post by Sherfy42 on 04/27/10 at 3:36pm So whats the deal with the 4bb carb I thought we could only run a 2bb, is it diffrent in the west coast ss? |
Title: Re: super stock gearing Post by hogracer3d on 04/27/10 at 3:49pm 2-bbl at Chow w/ weight penelty for over 360, I believe. WCSS is 604 crate, 2 or 4bbl, no cube limit |
Title: Re: super stock gearing Post by Sherfy42 on 04/27/10 at 5:01pm This was rich fireto old car #43. He was running back in the day a 6.50 gear at hanford with the dirt boss tires so that 6.20 should be close I think. |
Saturday Night Racer » Powered by YaBB 2.2.3! YaBB © 2000-2008. All Rights Reserved. |