Saturday Night Racer

Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl
Saturday Night Racer >> RACE TECH >> Which Axels?
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1300243791

Message started by Team X on 03/15/11 at 7:49pm

Title: Which Axels?
Post by Team X on 03/15/11 at 7:49pm

I have a bare bones housing for a Ford 9". It is a little over 56" from flange to flange and is for the small bearing 28 spline axels. What will the measurement be drum to drum when it is all together? What is the length of each of the axels?

Title: Re: Which Axels?
Post by ka_jd7and1 on 03/15/11 at 11:06pm

Do you know what it's out of?

Title: Re: Which Axels?
Post by Team X on 03/16/11 at 8:18am

I have no idea of what it is out of other than it has leaf spring pads.

Title: Re: Which Axels?
Post by ka_jd7and1 on 03/16/11 at 8:27am

See if this helps any:

http://www.enjenjo.com/9inch.html

http://forum.newjo.org/index.php?showtopic=9143

Title: Re: Which Axels?
Post by Team X on 03/16/11 at 8:50pm

Thank you, the 2nd site is especially helpful. Now if I knew some years, makes, & models it may make it easier at the wrecking yards. The leaf spring pads are in the original factory position. They are at 45" center to center. Thanks again

Title: Re: Which Axels?
Post by RACEGLASS on 03/16/11 at 10:47pm

Give the guys at the Gear Shop in Paramount a call 562-634-1396.

Title: Re: Which Axels?
Post by Team X on 03/24/11 at 6:52pm

Thanks Matt. We may have to go to L.A. next week. If they have a store front or shop we will try to visit them. Thanks again,
Dick