Saturday Night Racer

Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl
Saturday Night Racer >> RACE TECH >> 180 degree headers
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1306163772

Message started by woodracing35 on 05/23/11 at 8:16am

Title: 180 degree headers
Post by woodracing35 on 05/23/11 at 8:16am

are they good and will they work on an harris sport mod chassis

Title: Re: 180 degree headers
Post by Trinity Motorsports on 05/24/11 at 11:15pm

180 headers are a pain in the butt. You will have to call Harris and ask if they fit their chassis.

Title: Re: 180 degree headers
Post by XMODRACER on 06/22/11 at 10:09am

But they sound so cool . Who drives the trinity motorsports sportmod , lookkks good and runs very well . ;)

Title: Re: 180 degree headers
Post by Trinity Motorsports on 06/22/11 at 3:42pm

What number? The 22 is normally driven by Jeff Russell but he has only raced it twice... The 23 car has our logo on the door because we did his wrap, the car is owned and driven by Eric cimintal and mike Johnson. I will be driving the 22 car this weekend at Bakersfield. Russell has run about 12 races total, hobby stock and two sport mod races.

Title: Re: 180 degree headers
Post by XMODRACER on 06/23/11 at 12:46pm

Think it was the 22 in antelope valley , it was quik , was that u driving t ;)roy

Title: Re: 180 degree headers
Post by Trinity Motorsports on 06/27/11 at 9:44pm

No that is the 23 of mike Johnson. I drove the 22 car in Bakersfield this weekend.

Title: Re: 180 degree headers
Post by rickdurica on 07/07/11 at 1:45pm

There are a bunch of different style 180 degree headers, the type sold in the speedway catalog go over most engine mid plates. There are a few other styles that go lower on the sides of the engine and most mid plates have to be cut out for clearance. The other interference most chassis have with 180's is the engine bay bars aren't wide enough to fit them.

The really good thing about them is they are out of the way and rarely get damaged.