Saturday Night Racer

Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl
Saturday Night Racer >> RACE TECH >> Gears for Hanford SS
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1318228459

Message started by racer41x on 10/09/11 at 11:34pm

Title: Gears for Hanford SS
Post by racer41x on 10/09/11 at 11:34pm

I was told to run 6.33 or 6.50 for Hanford, running dirt boss tires. what would be in the ball park gear using the IMCA tire?

Title: Re: Gears for Hanford SS
Post by hogracer3d on 10/10/11 at 6:19am

540 to 620 on the little tire, @ about 7500+, has been our experiance

Title: Re: Gears for Hanford SS
Post by racer41x on 10/10/11 at 8:11am

thank you for the info!

Title: Re: Gears for Hanford SS
Post by racer41x on 10/10/11 at 8:52am

Have another ?, The IMCA tire have to be untouched(no grooving)

Title: Re: Gears for Hanford SS
Post by hogracer3d on 10/10/11 at 6:08pm

racer41x wrote on 10/10/11 at 8:52am:

Have another ?, The IMCA tire have to be untouched(no grooving)

Yea, by the rules they do, but I don't care, but Im not an official

Siping and grinding ok

Title: Re: Gears for Hanford SS
Post by Cal SS All-Star Shootout on 10/10/11 at 8:17pm

WCSS Tire Rule:
WHEELS AND TIRES: 1. Maximum rim (wheel) width is 8”. All wheels must be steel 2. Bead-locks may be used on all four (4) corners 3. Must use unaltered Hoosier ‘500’ Race tire, with IMCA stamped on sidewall... OR Unaltered Hoosier Race tire, G60-15 with IMCA stamped on sidewall.

ALL TIRES No chemical softening, conditioning of tires. Tires may be ground or siped within confines of tread (not past factory straight line). No grooving allowed

Title: Re: Gears for Hanford SS
Post by DaveBauerSS6 on 10/10/11 at 11:21pm

We run 5.83 at 7000 in the WCSS car. The IMCA stock car we run 6.20 at 6600-6800.