Saturday Night Racer

Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl
Saturday Night Racer >> RACE TECH >> BERT trans question
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1391210624

Message started by redbear on 01/31/14 at 3:23pm

Title: BERT trans question
Post by redbear on 01/31/14 at 3:23pm

I just got a car from someone that never ran it and knows nothing about it. The car barely moves when I push on the clutch pedal. The pedal has no resistance while pushing on it. I bled the master cyl. and bled at the trans, and the fluid came out like it had pressure. while car was on jack stands everything seemed fine, but when on the ground with the weight of the car it barely rolls forward and back. Is it the clutches inside or the master cyl. or something else. I have never had any problems before with my Berts or Brinn to have to solve. Any opinions are appreciated.

Title: Re: BERT trans question
Post by socaldirtmod on 09/04/14 at 2:59pm

if its bled good than the clutches are probably fried in the trans...