Saturday Night Racer

Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl
Saturday Night Racer >> CLASSIFIEDS >> Parts clean out
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1417745295

Message started by rb21 on 12/04/14 at 6:08pm

Title: Parts clean out
Post by rb21 on 12/04/14 at 6:08pm

Muncie tranny with 1st and 2nd removed. New output shaft that has been machined for 8" slip yoke and the mounting holes have been reinforced.

I also have many parts to build or repair muncies. Probably enough to build 5 trannys.

1.5 sets of tubular lower control for gm 68-72 a body.

Ford 9" gears 567 and 543

Powermaster part number 9428 started for Tilton reverse mount bell housing

2 left and 2 right aluminum wheelwood metric calipers

4 sets of upper control arms for 2010 and older Harris chassis. Some are brand new and some used and some have low friction ball joints in them.

2 sets of gun drilled axles

C and S alchohol carberator had not been run since rebuilt by c and s

2 lever shifter

Various autometer gauges new

Used quick car 3 gauge panel and switch panel

Afco shocks new
2 of 1074-6
1093-5
2 of 1076-4
2 of 1076
2 of 1576
1079-1
1576-4
1973

Afco used shocks
2 of 1996-2
1998-2
1994
1073-5
1576-4
2 of 1076-2
1077
1074
1073
1077-2

2 sets of Harris bird cages

Everything being sold is at best offer

Call or text 510-773-9364

Title: Re: Parts clean out
Post by rb21 on 12/17/14 at 4:23pm

added all the shock numbers that I have available
I do have 1st and 2nd gears that I could put back in the Muncie transmission