Saturday Night Racer

Saturday Night Racer
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl
Saturday Night Racer >> CLASSIFIEDS >> RHS raised runner sbc top end
http://www.latemodelracer.com/cgi-bin/yabb2/YaBB.pl?num=1440740910

Message started by norcal on 08/27/15 at 10:48pm

Title: RHS raised runner sbc top end
Post by norcal on 08/27/15 at 10:48pm

Pair of cnc ported heads w/matching ported raised runner victor intake. 2.100. 1.600 ti valves, ti retainers, Jessel shaft rockers 1.65 int ratio, 1.6 ex ratio w/all hardware. This is not your standard iron eagle stuff. If you want BIG POWER, and have to run cast iron, this is your top end. Heads are maged, and are good. Flow about 330 CFM. Bare heads from Brezinski are $2900, with no valves, etc. Look em up. RHS dont make em any more. $3200.00 for everything. Mark 916-496-7139

Title: Re: RHS raised runner sbc top end
Post by norcal on 09/08/15 at 4:33pm

$3000.00, like to see them go to a good home. Also have a slick track Comp cam roller w/ lifters 4-7 swap. I can look up, or give you number off back of cam. Can make package deal w/ heads, or seperate.

Title: Re: RHS raised runner sbc top end
Post by SS 49 on 09/11/15 at 7:41pm

What part number are the cylinder heads?

Title: Re: RHS raised runner sbc top end
Post by norcal on 09/12/15 at 3:13pm

The ONLY numbers under valve cover is D2, hope this helps, Mark.

Title: Re: RHS raised runner sbc top end
Post by norcal on 09/16/15 at 7:15am

Can send pix to interested people with phone #

Title: Re: RHS raised runner sbc top end
Post by norcal on 09/26/15 at 11:17pm

TTT

Title: Re: RHS raised runner sbc top end
Post by mike2 on 12/27/15 at 10:10pm

mark do you still have the heads and cam?? let me know.
mike

Title: Re: RHS raised runner sbc top end
Post by norcal on 12/27/15 at 10:34pm

No, they have been sold, sorry.

Title: Re: RHS raised runner sbc top end
Post by mike2 on 12/28/15 at 5:39pm

any of the parts?

Title: Re: RHS raised runner sbc top end
Post by norcal on 12/31/15 at 8:55am

Still have cam, and lifters only. Guy that bought them may not be able to use valves/ retainers.

Title: Re: RHS raised runner sbc top end
Post by mike2 on 01/01/16 at 8:43am

let me know prices im interested in all

Title: Re: RHS raised runner sbc top end
Post by mike2 on 01/01/16 at 8:52am

let me know or even if he wants to resell them

Title: Re: RHS raised runner sbc top end
Post by norcal on 01/01/16 at 3:13pm

10-4

Title: Re: RHS raised runner sbc top end
Post by mike2 on 01/01/16 at 10:25pm

mark what do you want for the cam?