Saturday Night Racer - IMCA mod motor

‹ Previous Topic | Next Topic ›

Pages: 1

Send Topic | Print

IMCA mod motor (Read 4227 times)

jselvidge

LMR Member

Offline

Posts: 147

IMCA mod motor
11/04/08 at 4:13pm

I have a fresh 360" (.040 over) mod motor sitting @ Precision Speed and Machine in Bakersfield. It has billet splayed mains, a cola 3.5" crank, crower rods, Pistons are Probes, Heads are full ported Vortec with a matched Edelbrock intake. Brand new comp cam. Rockers are crowers, valves are Manley severe duties. Complete pan to intake including a stewart water pump with pulleys, mini starter, small flywheel and a brinn coupler. No junk here, all good stuff. Call Jason Selvidge with any questions, can be seen @ the shop anytime. 661 303 3076.

IP Logged

jselvidge LMR Member Offline Posts: 147	Re: IMCA mod motor Reply #1 - 11/10/08 at 7:27am Forget to say asking price is $5,000. Also, I will consider part trades on a good aluminum block for our back up late model motor(400 blocks only)
Back to top	IP Logged

jselvidge LMR Member Offline Posts: 147	Re: IMCA mod motor Reply #2 - 11/22/08 at 7:37am ttt
Back to top	IP Logged

robbySAWYER Ex Member	Re: IMCA mod motor Reply #3 - 11/22/08 at 8:11am i thought we made a deal...i see how it is lol
Back to top	IP Logged

jselvidge LMR Member Offline Posts: 147	Re: IMCA mod motor Reply #4 - 12/01/08 at 8:21am ttt
Back to top	IP Logged

jselvidge LMR Member Offline Posts: 147	Re: IMCA mod motor Reply #5 - 12/16/08 at 4:00pm I also have an isky roller cam, lifters, and pushrods that drop right into this motor that I will throw in if it sells by mid Jan. They are in excellent shape with only a handul of races from a few years back when this was my open show motor.
Back to top	IP Logged

jselvidge LMR Member Offline Posts: 147	Re: IMCA mod motor Reply #6 - 01/01/09 at 12:59pm New year is here. Time to get ready to race.
Back to top	IP Logged

jselvidge LMR Member Offline Posts: 147	Re: IMCA mod motor Reply #7 - 01/21/09 at 4:53pm ttt
Back to top	IP Logged

robbySAWYER Ex Member	Re: IMCA mod motor Reply #8 - 01/21/09 at 7:52pm hey check ur pm
Back to top	IP Logged

jselvidge LMR Member Offline Posts: 147	Re: IMCA mod motor Reply #9 - 02/24/09 at 7:04am Still have it, will take $4500 and will consider separating short block from heads/intake.
Back to top	IP Logged

jselvidge LMR Member Offline Posts: 147	Re: IMCA mod motor Reply #10 - 03/14/09 at 7:50am bump
Back to top	IP Logged

Pages: 1

Send Topic | Print

‹ Previous Topic | Next Topic ›