Saturday Night Racer - help with power stering

‹ Previous Topic | Next Topic ›

Pages: 1

Send Topic | Print

help with power stering (Read 2896 times)

W1CK3D R4C1NG

LMR Senior

Offline

Posts: 492
Bakersfield

help with power stering
06/19/09 at 6:25pm

a friend of mine is having weird problems with his race car... when you start the motor, the wheels turn on their own, all the way to the right... then you cant turn the steering wheel at all untill you shut the motor off... oh and the car is on jack stands, so im not sure if the wheels will turn on there own with all the weight on them...

anyone have any thought's?

Thanks...
Rich

JKD, American Fab., Trinity Motorsports

YIM

IP Logged

lwiseracing LMR God Offline what else would i do on sat. night Posts: 614	Re: help with power stering Reply #1 - 06/19/09 at 6:53pm the lines r reversed on the box probably
Back to top	thanks: k&b pump supply.. h&s body.. golden empire tranny..puma soft.. dain pluming.. IP Logged

tmfab1 LMR Rookie Offline kansas its better than california Posts: 41	Re: help with power stering Reply #2 - 06/19/09 at 6:58pm you are correct mr wize
Back to top	IP Logged

W1CK3D R4C1NG LMR Senior Offline Posts: 492 Bakersfield	Re: help with power stering Reply #3 - 06/19/09 at 9:19pm i figured that had to be it, but i wanted ask before i told him... thanks guys...
Back to top	JKD, American Fab., Trinity Motorsports YIM IP Logged

W1CK3D R4C1NG LMR Senior Offline Posts: 492 Bakersfield	Re: help with power stering Reply #4 - 06/29/09 at 7:36am thought i would just update on here... the gear box was bad... he switched the lines and it jacked up his power steering pump... which sucks, becuase it was a bran new pump... he said it blew the fron cover off of the pump... not exactly sure what he's talking about, becuase i havent seen it... Thanks... Rich
Back to top	JKD, American Fab., Trinity Motorsports YIM IP Logged

Pages: 1

Send Topic | Print

‹ Previous Topic | Next Topic ›