Saturday Night Racer - 180 degree headers

Pages: 1

180 degree headers (Read 4446 times)

woodracing35 LMR God Offline 2010 AMERICAN STOCK CHAMPION Posts: 534	180 degree headers 05/23/11 at 8:16am are they good and will they work on an harris sport mod chassis
Back to top	IP Logged

Trinity Motorsports LMR God Offline To God Be The Glory! Posts: 823	Re: 180 degree headers Reply #1 - 05/24/11 at 11:15pm 180 headers are a pain in the butt. You will have to call Harris and ask if they fit their chassis.
Back to top	WWW IP Logged

XMODRACER LMR Senior Offline Dirt Late Models Rule! Posts: 461	Re: 180 degree headers Reply #2 - 06/22/11 at 10:09am But they sound so cool . Who drives the trinity motorsports sportmod , lookkks good and runs very well .
Back to top	IP Logged

Trinity Motorsports

LMR God

Offline

To God Be The Glory!

Posts: 823

Re: 180 degree headers
Reply #3 - 06/22/11 at 3:42pm

What number? The 22 is normally driven by Jeff Russell but he has only raced it twice... The 23 car has our logo on the door because we did his wrap, the car is owned and driven by Eric cimintal and mike Johnson. I will be driving the 22 car this weekend at Bakersfield. Russell has run about 12 races total, hobby stock and two sport mod races.

WWW

IP Logged

XMODRACER LMR Senior Offline Dirt Late Models Rule! Posts: 461	Re: 180 degree headers Reply #4 - 06/23/11 at 12:46pm Think it was the 22 in antelope valley , it was quik , was that u driving t roy
Back to top	IP Logged

Trinity Motorsports LMR God Offline To God Be The Glory! Posts: 823	Re: 180 degree headers Reply #5 - 06/27/11 at 9:44pm No that is the 23 of mike Johnson. I drove the 22 car in Bakersfield this weekend.
Back to top	WWW IP Logged

rickdurica

LMR Rookie

Offline

Duricaracing.com

Posts: 69
Las Vegas, NV

Re: 180 degree headers
Reply #6 - 07/07/11 at 1:45pm

There are a bunch of different style 180 degree headers, the type sold in the speedway catalog go over most engine mid plates. There are a few other styles that go lower on the sides of the engine and most mid plates have to be cut out for clearance. The other interference most chassis have with 180's is the engine bay bars aren't wide enough to fit them.

The really good thing about them is they are out of the way and rarely get damaged.

WWW

IP Logged

Pages: 1

Send Topic | Print

‹ Previous Topic | Next Topic ›