Home | Help | Search | Login | Register

Welcome, Guest. Please Login or Register 05/01/25 at 2:33pm


SATURDAY NIGHT RACER
Saturday Night RacerSaturday Night RacerRACE TECH › saginaws locking in 2 gears


Pages: 1
saginaws locking in 2 gears (Read 5535 times)
old dirt racer
LMR Senior
****
Offline

Dirt Late Models
Rule!

Posts: 265

saginaws locking in 2 gears
04/23/12 at 4:08pm
 
two seperate times we have had trans lock in two gears while leting off intering turns  ,when i get it back to the neuteral position its still in a gear nothing looks messed up inside ,any info would be great help
Back to top
 
 
  IP Logged
4QChris
LMR Member
***
Offline

Sport mod in the
works

Posts: 227
Bakersfield
Re: saginaws locking in 2 gears
Reply #1 - 04/23/12 at 4:18pm
 
We had one were the shaft seized to first gear. Something with a bushing going out.
Back to top
 
 
  IP Logged
XMODRACER
LMR Senior
****
Offline

Dirt Late Models
Rule!

Posts: 461

Re: saginaws locking in 2 gears
Reply #2 - 04/23/12 at 9:06pm
 
WHAT USUALLY HAPPENS IS THE SLIP YOKE GOES IN TO FAR BOTTOMING ON THE SPLINES FORCING THE OUTPUT SHAFT INTO THE INPUT SHAFT AND OVER TIME THEY "GALL" OR SIEZE TOGETHER ...................YUR DONE , THRO IT IN THE TRASH . I SELLEM W THE SHAFTS MACHINED TO EXCEPT 8" SLIP YOKES 250$ , HAD MY SAME TRANS IN 2 DIFF CARS OVER THE LAST 3-4 YEARS ONLY THING I BROKE WAS INPUT SHAFT @SPLINES , THEY DONT LIKE TO "HOP" IN A MOD . Wink
Back to top
 
 
  IP Logged
doggie1956
LMR Rookie
*
Offline

Dirt Late Models
Rule!

Posts: 38
somewhere in California
Re: saginaws locking in 2 gears
Reply #3 - 04/24/12 at 2:14pm
 
you might check the side cover  and see if the spring detent is still there and the steel arm is not missing the end part of the lever holding the shifter arm in and out of gear.
Back to top
 
 
  IP Logged
RACEGLASS
LMR Member
***
Offline

IN ORDER TO WIN, YOU
HAVE TO FINISH

Posts: 160
CA.
Re: saginaws locking in 2 gears
Reply #4 - 04/24/12 at 2:39pm
 
Check your shifter linkage and make sure that it isn't rubbing on the sheet metal of the interior or somewhere else.  It could be that the chassis and body are moving  and flexing around enough when the car goes into the corners that if a shifter arm, rod or lever is rubbing it can shift it into two gears at once.  It's sort of hard to explain but hopefully you get my drift.
Back to top
 
 

Win, crash or lose....any night your at the races is better than sitting home watching some boring NASCAR race.
WWW   IP Logged
TOOLCHUCKER
LMR Rookie
*
Offline



Posts: 88
Central Valley
Re: saginaws locking in 2 gears
Reply #5 - 04/24/12 at 8:20pm
 
doggie1956 wrote on 04/24/12 at 2:14pm:
you might check the side cover  and see if the spring detent is still there and the steel arm is not missing the end part of the lever holding the shifter arm in and out of gear.

I agree Smiley  Change the springs.
Back to top
 
 
  IP Logged
TIM_BEWLEY
LMR God
*****
Offline

road zombie

Posts: 1629

Re: saginaws locking in 2 gears
Reply #6 - 04/24/12 at 8:35pm
 
yea, is your shifter mounted to the floor of the car or on the trans? check your trans mount and make sure it is good. things move alot on theses cars.
Back to top
 
 



PAN OFF GETTING A 1" INSPECTION PLUG!
  IP Logged
old dirt racer
LMR Senior
****
Offline

Dirt Late Models
Rule!

Posts: 265

Re: saginaws locking in 2 gears
Reply #7 - 04/24/12 at 8:48pm
 
shifter is mounted to cockpit  4speed with only linkage to 3&4  and reverse .  1&2 are not hooked up just in neuteral position ,,,
Back to top
 
 
  IP Logged
CaliforniaPickle14B
LMR God
*****
Offline

Drive A Dirt Sport
Mod Have A Blast

Posts: 888
Madera CA
Re: saginaws locking in 2 gears
Reply #8 - 04/25/12 at 8:38am
 
hey steve we was talking about this yesterday maybe with 1st and 2nd not hooked to anything maybe take some washer that fit over where u would put the shifter linkage and lock it down with a bolt so it doesnt move the shift lever at all. you wouldnt think it would move but its better safe then sorry
Back to top
 
 

LETS GO SPORT MODING
California Pickle On Dirt Driving The 14B Sport Mod Nick Lawrence AKA PICKLE
Phone # 209-752-5320
Call or Text Anytime
another site/pickle14b
EMAIL lawrencetowingandrepair@gmail.com
WWW | Skype/VoIP | YIM   IP Logged
old dirt racer
LMR Senior
****
Offline

Dirt Late Models
Rule!

Posts: 265

Re: saginaws locking in 2 gears
Reply #9 - 04/25/12 at 6:11pm
 
yeah fab a bracket ,   i just dont see how it can get in two gears at 6500 rpms and not explode , throw another bullit in let it fly lol,,,
Back to top
 
 
  IP Logged
CaliforniaPickle14B
LMR God
*****
Offline

Drive A Dirt Sport
Mod Have A Blast

Posts: 888
Madera CA
Re: saginaws locking in 2 gears
Reply #10 - 04/25/12 at 10:02pm
 
ya idk either u would think atleast get some chatter of gears or something, not good for driveline and rearends. hey what u get out of this last tranny about 4 races? maybe should change it every 4 races lol  Cheesy Cheesy Cheesy
Back to top
 
 

LETS GO SPORT MODING
California Pickle On Dirt Driving The 14B Sport Mod Nick Lawrence AKA PICKLE
Phone # 209-752-5320
Call or Text Anytime
another site/pickle14b
EMAIL lawrencetowingandrepair@gmail.com
WWW | Skype/VoIP | YIM   IP Logged
doggie1956
LMR Rookie
*
Offline

Dirt Late Models
Rule!

Posts: 38
somewhere in California
Re: saginaws locking in 2 gears
Reply #11 - 05/01/12 at 9:49am
 
in the cover where the shifter lever goes thru for gears 1/2,, run a allen head bolt backwards so the detent thinks it's the lever arm.
Back to top
 
 
  IP Logged
Pages: 1





Saturday Night Racer » Powered by YaBB 2.2.3!
YaBB © 2000-2008. All Rights Reserved.