Home | Help | Search | Login | Register

Welcome, Guest. Please Login or Register 05/01/25 at 7:29am


SATURDAY NIGHT RACER
Saturday Night Racer › Saturday Night Racer › RACE TECH › Putting 2 piece nose together


‹ Previous Topic | Next Topic ›
Pages: 1
Putting 2 piece nose together (Read 3140 times)
Ryan D.
LMR God
*****
Offline



Posts: 777
Nipomo,Ca
Putting 2 piece nose together
03/28/13 at 8:16pm  
Ive always just Pop riveted it together. Im thinking bolts and fender washers this time. How do you do it????
Back to top
 
 
  IP Logged
ninjaforce2
LMR Member
***
Offline

Dirt Late Models
Rule!

Posts: 216
Re: Putting 2 piece nose together
Reply #1 - 03/28/13 at 8:48pm  
I have always used 1/4" bolts with wide washers to put them together, it holds tighter than rivets and it takes some abuse before it even gets ripped apart. goodluck!
Back to top
 
 
  IP Logged
racincowboy3
LMR Member
***
Offline

GO BIG OR GO HOME

Posts: 158
Nuevo, CA
Re: Putting 2 piece nose together
Reply #2 - 03/29/13 at 10:39am  
We pop rivet them... but I use a fender washer on both sides of the rivet so the rivet is pulling again the metal and not the plastic.  pulls it nice and tight and it much stronger that way!
Back to top
 
 
  IP Logged
TALON75
LMR God
*****
Offline

DO IT INTHE DIRT

Posts: 735
Re: Putting 2 piece nose together
Reply #3 - 03/31/13 at 12:44am  
I use tri fold pop rivets with no washers, they pull out easier usually without tearing the plasic, after one comes out a few times then it is time for bolts and washers. After all usable drilling space is taken, use 3 inch flat strap to attach the sides together.
Back to top
 
 
  IP Logged
Pages: 1
‹ Previous Topic | Next Topic ›





Saturday Night Racer » Powered by YaBB 2.2.3!
YaBB © 2000-2008. All Rights Reserved.