Saturday Night Racer - just a thought on lower trailing arms of a sport mod

‹ Previous Topic | Next Topic ›

Pages: 1

Send Topic | Print

just a thought on lower trailing arms of a sport mod (Read 6580 times)

CaliforniaPickle14B

LMR God

Offline

Drive A Dirt Sport
Mod Have A Blast

Posts: 888
Madera CA

just a thought on lower trailing arms of a sport mod
02/24/14 at 3:07pm

Just a thought

Now on A mods they use floating bridcages so they roate for the 4 bar set up and get the car to hike.

Now on all the sport mods i seen so far we all run the lower trailing arm mount at the bottom of the reared housing snout art the centerline of the tube. What if we was to put a mount in the front of the rear end and raised the chassis mount to get the right angle, this would avoid the bar from binding in the instance that the car did get enough lift and didn't button out on the under slung. Any thoughts or had anyone tried this in any mods?

LETS GO SPORT MODING
California Pickle On Dirt Driving The 14B Sport Mod Nick Lawrence AKA PICKLE
Phone # 209-752-5320
Call or Text Anytime
another site/pickle14b
EMAIL lawrencetowingandrepair@gmail.com

WWW | Skype/VoIP | YIM

IP Logged

4QChris LMR Member Offline Sport mod in the works Posts: 227 Bakersfield	Re: just a thought on lower trailing arms of a sport mod Reply #1 - 02/24/14 at 11:02pm Shaw already has something very similar. Kind of at a forty five degree angle from the axle center line. Don't run much angle with it
Back to top	IP Logged

CaliforniaPickle14B LMR God Offline Drive A Dirt Sport Mod Have A Blast Posts: 888 Madera CA	Re: just a thought on lower trailing arms of a sport mod Reply #2 - 02/25/14 at 12:48pm Hmm well if shaw has this set up i guess i go see what they have done with it thanks for your reply
Back to top	LETS GO SPORT MODING California Pickle On Dirt Driving The 14B Sport Mod Nick Lawrence AKA PICKLE Phone # 209-752-5320 Call or Text Anytime another site/pickle14b EMAIL lawrencetowingandrepair@gmail.com WWW \| Skype/VoIP \| YIM IP Logged

XMODRACER LMR Senior Offline Dirt Late Models Rule! Posts: 461	Re: just a thought on lower trailing arms of a sport mod Reply #3 - 04/02/14 at 12:33pm I believe what yur talking bout is called a hillbillie bird cage , think I remember kellon chadwick ran this on one of his pro chassis, if I remember right hillbillie right , two link under on lefy and pullbar on top.
Back to top	IP Logged

DeltaGraphix

LMR Rookie

Offline

They are called
SPORT MODS not
B-MODS

Posts: 11
California

Re: just a thought on lower trailing arms of a sport mod
Reply #4 - 08/12/14 at 2:55pm

XMODRACER wrote on 04/02/14 at 12:33pm:

I believe what yur talking bout is called a hillbillie bird cage , think I remember kellon chadwick ran this on one of his pro chassis, if I remember right hillbillie right , two link under on lefy and pullbar on top. Cheesy

That was the standard mount for the Pro and it was only used for the spring mount and the shock.

IP Logged

Pages: 1

Send Topic | Print

‹ Previous Topic | Next Topic ›