Home | Help | Search | Login | Register

Welcome, Guest. Please Login or Register 05/01/25 at 1:06pm


SATURDAY NIGHT RACER
Saturday Night RacerSaturday Night RacerCLASSIFIEDS › Sledge Hammer Ignition Setup


Pages: 1
Sledge Hammer Ignition Setup (Read 792 times)
ep33510
LMR Member
***
Offline

I love YaBB 1G -
SP1!

Posts: 176
NC USA
Sledge Hammer Ignition Setup
10/26/15 at 5:45pm
 
The Sledge Hammer Ignition Setup

This is only for that Serious Racer who takes pride in their racing program and wants only the very best possible performance solutions. If you’re currently running an MSDŽIgnition 6 series analog box with a Blaster 2 coil. And if your competition has the same setup as yours, here’s your chance to take your program to the next level. Consider this; you could have access to a package that has the same foot print as a MSDŽIgnition 6AL with a 30% greater energy output. With the matching coil this setup has made a major difference in all platforms tested. It does not matter if you are running a 9to1 engine or an all out Fire Breather you too can benefit from this upgrade! What does this mean to my program your asking, put simply this setup allows you access to the engine performance your builder gave you. You have always had it under the hood you just have never had accessed to it until Now!
These systems were using are used (10 hours or less of run time) MSDŽIgnition systems from a major racing series. Once we have them in house they are gone through and each ignition box is performance matched with the correct ignition coil for the best track results.  The typical turnaround time once an order is placed runs 7 to 10 days. The cost to access this for your racing program for the 2015 racing season is $425.00

If you have any questions about this offer please feel free to contact us about it and how it can help your racing program.  

Pat Collins

704-995-4286
Back to top
 
 
WWW   IP Logged
Pages: 1





Saturday Night Racer » Powered by YaBB 2.2.3!
YaBB © 2000-2008. All Rights Reserved.